Product
Self-aligning ball bearings
Self-aligning ball bearings are a type of double-row rolling ball bearing. The outer ring raceway is spherical, and the inner ring has a double-row raceway. Two rows of steel balls are assembled between the inner and outer rings, providing self-aligning capability.
Product Introduction
Self-aligning ball bearings are a type of double-row rolling ball bearing. The outer ring raceway is spherical, and the inner ring has a double-row raceway. Two rows of steel balls are assembled between the inner and outer rings, providing self-aligning capability. This allows the inner ring to tilt relative to the outer ring by a maximum of approximately 2° to 3°, automatically compensating for coaxiality deviations caused by shaft deflection, machining errors, and misalignment during installation. They primarily bear radial loads and can also withstand a small amount of bidirectional axial loads, but cannot withstand pure axial loads. They have a low coefficient of friction and are suitable for medium- to high-speed operation. They are divided into two main categories:
- Cylindrical bore self-aligning ball bearing: directly mounted on the optical axis;
- Tapered bore self-aligning ball bearing (suffix K, taper 1:12): Installed with a locknut/removal sleeve for easy disassembly, assembly, and clearance adjustment; Optional configuration: with 2Z dust cover, 2RS rubber seals, pre-filled with grease for dust and water protection. Compliant with: GB/T281-2013, internationally recognized ISO standard.
Applicable Locations/Application Scenarios (Selling Points of Independent Websites)
Suitable for equipment where the shaft is easily bent and the bearing housing is difficult to ensure coaxiality:
- Fan, ventilation fan, ventilator
- Conveyor and conveyor belt equipment
- Small and medium-sized motors
- Textile machinery, woodworking machinery
- agricultural machinery
- Papermaking equipment
- Ordinary mines, plastic machinery
- Water pumps, low-noise instruments and equipment
Not recommended for: heavy-load impact, large pure axial load conditions (self-aligning roller bearings are recommended for this scenario).
Installation Method
1) Self-aligning ball bearing with cylindrical bore
- Clean the journal and bearing housing bore, remove burrs and rust, and measure the mating dimensions;
- Apply lubricant to the mating surfaces;
- Small interference fit: Press machine + copper bushing, only press the inner ring end face (for shaft installation); press the outer ring end face (for bearing housing installation), do not directly strike the steel balls and cage;
- Large interference fit: Hot fitting, heat the bearing to 80~100℃, do not heat with open flame, and assemble quickly;
- Do not tighten the bolts on the bearings at both ends of the same shaft. Rotate the shaft a few times to allow the bearings to automatically align, and then tighten them to secure them.
- Add grease and run the test run under no-load for 30–60 minutes, monitoring the temperature rise.
2) Conical hole (K type) + adapter sleeve installation
- Place the locking sleeve onto the optical shaft, and push the bearing into the locking sleeve;
- The rotating lock nut advances the bearing, and the interference fit is controlled by the reduction in
- After installation, measure the radial clearance to confirm that the clearance meets the standard.
- Locking and anti-loosening device.
Installation Core Principles
The force must be applied perpendicularly through the bearing end face, and the force can only be applied to the interference fit ring. It is strictly forbidden to transmit the impact force through the steel ball.
Usage & Maintenance Precautions
- Cleaning: Bearings are precision parts; dust and moisture can cause wear and corrosion. Sealed 2RS/2Z bearings should not be disassembled for cleaning. Open bearings should be cleaned and re-lubricated before assembly.
- Centering limitation: The tilt angle should not exceed 3°, otherwise it will significantly shorten the lifespan;
- Load limitations: Radial loads are the primary load; axial loads should not be excessive, and the load should not be subjected to axial force alone.
- Lubrication and maintenance: Grease lubrication requires regular grease replenishment; oil lubrication requires regular oil replacement; excessively high temperatures will accelerate grease aging.
- Impact is prohibited: Knocking or impact with heavy objects will cause indentations on the raceway and breakage of the steel balls;
- Storage: Store in a dry, dark place, lay flat, and do not stack or compress for extended periods; it is recommended to wear gloves when handling bearings to prevent rust from hand sweat.
- Fit selection: Select a tight fit for the rotating inner ring; select a looser fit for the rotating outer ring or if play compensation is required.
- Clearance selection: standard CN clearance; C3 large clearance is selected for high temperature and large interference conditions.
Commonly Used Model Dimensions Table (d = inner diameter, D = outer diameter, B = width, unit mm)
Model (K = conical bore) | d Inner diameter | D Outer diameter | B Width | r Minimum chamfer | Cr Basic dynamic load (kN) | Cor Basic static load (kN) | Grease-lubricated limiting speed (rpm) | Reference weight (kg) Optional suffixes: 2RS double-sided adhesive seal / 2Z double-sided iron dust cover; K = 1:12 conical bore, with locking sleeve
12 Series (Narrow Self-Aligning Ball Bearings)
| Model | d | D | B | r | Cr | Cor | Grease Rotation Speed | Weight (kg) |
| 1200 | 10 | 26 | 8 | 0.3 | 5.55 | 1.19 | 18000 | 0.033 |
| 1201 | 12 | 30 | 9 | 0.3 | 5.70 | 1.27 | 17000 | 0.039 |
| 1202 | 15 | 35 | 11 | 0.3 | 5.85 | 2.05 | 15000 | 0.051 |
| 1203 | 17 | 40 | 12 | 0.3 | 6.10 | 2.40 | 12000 | 0.076 |
| 1204 | 20 | 47 | 14 | 0.6 | 7.70 | 3.20 | 10000 | 0.120 |
| 1205 | 25 | 52 | 15 | 0.6 | 9.30 | 4.00 | 9000 | 0.140 |
| 1206 | 30 | 62 | 16 | 1.0 | 12.20 | 5.80 | 7500 | 0.230 |
| 1207 | 35 | 72 | 17 | 1.0 | 12.20 | 6.60 | 6700 | 0.320 |
| 1208 | 40 | 80 | 18 | 1.0 | 14.80 | 8.50 | 6300 | 0.410 |
| 1209 | 45 | 85 | 19 | 1.0 | 17.20 | 9.80 | 5600 | 0.470 |
| 1210 | 50 | 90 | 20 | 1.0 | 17.80 | 10.80 | 5300 | 0.525 |
| 1211 | 55 | 100 | 21 | 1.5 | 21.00 | 13.20 | 4800 | 0.710 |
| 1212 | 60 | 110 | 22 | 1.5 | 24.20 | 15.50 | 4300 | 0.870 |
| 1213 | 65 | 120 | 23 | 1.5 | 26.80 | 17.80 | 4000 | 1.100 |
| 1214 | 70 | 125 | 24 | 1.5 | 27.80 | 19.20 | 3600 | 1.200 |
| 1215 | 75 | 130 | 25 | 1.5 | 30.80 | 21.50 | 3400 | 1.320 |
| 1216 | 80 | 140 | 26 | 2.0 | 33.00 | 23.50 | 3000 | 1.650 |
| 1217 | 85 | 150 | 28 | 2.0 | 39.50 | 27.50 | 2800 | 2.100 |
| 1218 | 90 | 160 | 30 | 2.0 | 44.20 | 31.80 | 2600 | 2.500 |
| 1219 | 95 | 170 | 32 | 2.0 | 49.00 | 35.80 | 2400 | 3.000 |
| 1220 | 100 | 180 | 34 | 2.0 | 57.20 | 42.20 | 2200 | 3.700 |
22 series (wide self-aligning ball bearings, thicker than the 12 series)
| Model | d | D | B | r | Cr | Cor | Grease Rotation Speed | Weight (kg) |
| 2200 | 10 | 30 | 14 | 0.3 | 7.12 | 1.58 | 17000 | 0.042 |
| 2201 | 12 | 32 | 14 | 0.3 | 8.80 | 1.80 | 16000 | 0.048 |
| 2202 | 15 | 35 | 14 | 0.3 | 7.65 | 1.80 | 14000 | 0.055 |
| 2203 | 17 | 40 | 16 | 0.3 | 9.90 | 2.45 | 12000 | 0.085 |
| 2204 | 20 | 47 | 18 | 0.6 | 9.95 | 2.65 | 11000 | 0.150 |
| 2205 | 25 | 52 | 18 | 0.6 | 12.00 | 3.30 | 9500 | 0.180 |
| 2206 | 30 | 62 | 20 | 1.0 | 15.20 | 4.60 | 8500 | 0.260 |
| 2207 | 35 | 72 | 23 | 1.0 | 21.50 | 6.60 | 7500 | 0.392 |
| 2208 | 40 | 80 | 23 | 1.0 | 24.80 | 8.00 | 6700 | 0.510 |
| 2209 | 45 | 85 | 23 | 1.0 | 27.20 | 9.20 | 6000 | 0.550 |
| 2210 | 50 | 90 | 23 | 1.0 | 27.80 | 10.00 | 5600 | 0.590 |
| 2211 | 55 | 100 | 25 | 1.5 | 34.00 | 13.00 | 5000 | 0.810 |
| 2212 | 60 | 110 | 28 | 1.5 | 39.50 | 15.20 | 4500 | 1.100 |
| 2213 | 65 | 120 | 31 | 1.5 | 44.20 | 17.80 | 4000 | 1.450 |
| 2214 | 70 | 125 | 31 | 1.5 | 44.80 | 19.20 | 3800 | 1.520 |
| 2215 | 75 | 130 | 31 | 1.5 | 47.50 | 21.20 | 3600 | 1.600 |
| 2216 | 80 | 140 | 33 | 2.0 | 54.20 | 24.50 | 3200 | 2.000 |
| 2217 | 85 | 150 | 36 | 2.0 | 61.80 | 28.50 | 3000 | 2.500 |
| 2218 | 90 | 160 | 40 | 2.0 | 69.50 | 33.80 | 2800 | 3.200 |
| 2219 | 95 | 170 | 43 | 2.0 | 78.00 | 38.50 | 2600 | 4.000 |
| 2220 | 100 | 180 | 46 | 2.0 | 88.50 | 45.20 | 2400 | 4.900 |
13 series (larger outer diameter, load capacity higher than 12 and 22)
| Model | d | D | B | r | Cr | Cor | Grease Rotation Speed | Weight (kg) |
| 1300 | 10 | 35 | 11 | 0.6 | 9.42 | 2.12 | 18000 | 0.058 |
| 1301 | 12 | 37 | 12 | 0.6 | 9.80 | 2.30 | 17000 | 0.065 |
| 1302 | 15 | 42 | 13 | 0.6 | 10.50 | 2.60 | 15000 | 0.080 |
| 1303 | 17 | 47 | 14 | 0.6 | 12.50 | 3.15 | 13000 | 0.110 |
| 1304 | 20 | 52 | 15 | 0.6 | 14.20 | 3.80 | 11000 | 0.140 |
| 1305 | 25 | 62 | 17 | 1.0 | 17.90 | 5.00 | 9600 | 0.249 |
| 1306 | 30 | 72 | 19 | 1.0 | 21.00 | 6.80 | 8000 | 0.340 |
| 1307 | 35 | 80 | 21 | 1.0 | 25.80 | 8.50 | 7100 | 0.460 |
| 1308 | 40 | 90 | 23 | 1.0 | 30.50 | 10.80 | 6300 | 0.640 |
| 1309 | 45 | 100 | 25 | 1.0 | 36.00 | 13.20 | 5600 | 0.840 |
| 1310 | 50 | 110 | 27 | 1.5 | 43.00 | 16.50 | 5000 | 1.120 |
| 1311 | 55 | 120 | 29 | 1.5 | 49.50 | 19.80 | 4500 | 1.450 |
| 1312 | 60 | 130 | 31 | 1.5 | 57.20 | 23.50 | 4000 | 1.850 |
| 1313 | 65 | 140 | 33 | 2.0 | 61.80 | 26.50 | 3800 | 2.300 |
| 1314 | 70 | 150 | 35 | 2.0 | 69.50 | 30.80 | 3400 | 2.800 |
| 1315 | 75 | 160 | 37 | 2.0 | 76.80 | 35.00 | 3200 | 3.400 |
| 1316 | 80 | 170 | 39 | 2.0 | 86.50 | 40.00 | 3000 | 4.100 |
| 1317 | 85 | 180 | 41 | 2.0 | 94.80 | 45.00 | 2800 | 4.800 |
| 1318 | 90 | 190 | 43 | 2.0 | 102.00 | 50.80 | 2600 | 5.600 |
| 1319 | 95 | 200 | 45 | 2.0 | 110.00 | 57.20 | 2400 | 6.500 |
| 1320 | 100 | 215 | 47 | 2.0 | 122.00 | 64.20 | 2200 | 7.700 |
23 Series (Extra-wide, the highest load-bearing model among self-aligning ball bearings)
| Model | d | D | B | r | Cr | Cor | Grease Rotation Speed | Weight (kg) |
| 2300 | 10 | 35 | 17 | 0.6 | 12.50 | 2.72 | 17000 | 0.083 |
| 2301 | 12 | 37 | 17 | 0.6 | 13.20 | 2.95 | 16000 | 0.090 |
| 2302 | 15 | 42 | 17 | 0.6 | 13.80 | 3.25 | 14000 | 0.105 |
| 2303 | 17 | 47 | 19 | 0.6 | 16.80 | 3.95 | 12000 | 0.140 |
| 2304 | 20 | 52 | 21 | 0.6 | 18.80 | 4.70 | 10500 | 0.190 |
| 2305 | 25 | 62 | 24 | 1.0 | 24.20 | 6.55 | 9000 | 0.320 |
| 2306 | 30 | 72 | 27 | 1.0 | 29.80 | 8.80 | 7500 | 0.470 |
| 2307 | 35 | 80 | 31 | 1.0 | 37.80 | 11.50 | 6700 | 0.680 |
| 2308 | 40 | 90 | 33 | 1.0 | 44.80 | 13.40 | 6000 | 0.950 |
| 2309 | 45 | 100 | 36 | 1.0 | 51.80 | 16.80 | 5300 | 1.250 |
| 2310 | 50 | 110 | 40 | 1.5 | 60.50 | 20.80 | 4800 | 1.640 |
| 2311 | 55 | 120 | 43 | 1.5 | 68.20 | 24.80 | 4300 | 2.100 |
| 2312 | 60 | 130 | 46 | 1.5 | 76.80 | 29.50 | 3800 | 2.600 |
| 2313 | 65 | 140 | 48 | 2.0 | 84.50 | 34.00 | 3600 | 3.200 |
| 2314 | 70 | 150 | 51 | 2.0 | 91.80 | 38.50 | 3200 | 3.900 |
| 2315 | 75 | 160 | 55 | 2.0 | 102.00 | 44.20 | 3000 | 4.700 |
| 2316 | 80 | 170 | 58 | 2.0 | 112.00 | 50.20 | 2800 | 5.600 |
| 2317 | 85 | 180 | 60 | 2.0 | 120.00 | 56.50 | 2600 | 6.500 |
| 2318 | 90 | 190 | 64 | 2.0 | 130.00 | 63.80 | 2400 | 7.600 |
| 2319 | 95 | 200 | 67 | 2.0 | 142.00 | 72.00 | 2200 | 8.800 |
| 2320 | 100 | 215 | 73 | 2.0 | 162.00 | 81.80 | 2000 | 10.600 |
Series Description:
- 12 Series: Narrow Width Self-Aligning Ball Bearings
- 22 Series: Wide-type self-aligning ball bearings
- 13 Series: Thickened outer diameter for higher load capacity
- 23 Series: Wide and thickened, maximum load capacity