German JVAV Bearing

Send a message

Contact Us Inquiry

Product

Linear guide rail

HG high-assembly linear guide : Four-row 45° single-arc ball bearing structure, high assembly height, heavy-duty high rigidity, four-way equal load, self-aligning, absorbs mounting surface errors, supports high-speed precision reciprocating motion , strong anti-overturning moment, suitable for heavy cutting and high-load conditions.

Request a Quote
Product Details

Product Introduction

HG high-assembly linear guide

HG high-assembly linear guide : Four-row 45° single-arc ball bearing structure, high assembly height, heavy-duty high rigidity, four-way equal load, self-aligning, absorbs mounting surface errors, supports high-speed precision reciprocating motion , strong anti-overturning moment, suitable for heavy cutting and high-load conditions. Available in square HGH and flange HGW sliders, and in interchangeable/non-interchangeable paired types .

EG low-profile linear guide

EG Low-profile linear guides: Low-profile, compact four-row ball guides with lower overall height and shorter sliders, providing equal load in four directions. They are also self-aligning , occupy less equipment space, and offer high cost-effectiveness, making them suitable for space-constrained automation equipment. Available in square EGH and flange EGW sliders, each with a ball retainer, ensuring the balls won’t fall out when the slider is removed and providing good interchangeability.

Material: The guide rail and slider body are made of bearing steel, quenched and ground; ball bearing steel; standard dustproof end cover, metal scraper can be added.

Key differences between HG and EG : HG: High assembly height, larger size, greater load capacity, stronger rigidity, better anti-tipping properties; preferred for heavy-duty machine tools. EG: Low assembly height, compact structure, moderate load capacity; preferred for automation, engraving machines, and small equipment.

HA Extended Heavy-Duty Slider (HG High Assembly Series HGH-HA / HGW-HA)

HA belongs to the HG high-assembly series of extended heavy-duty sliders . The slider body is longer, and the number of ball circulation loops is increased, resulting in significantly improved rated load and overturning moment compared to the standard CA slider, along with greater rigidity. It features four rows of 45° ball bearings, equal load capacity in four directions, and self-aligning design; suitable for heavy-duty cutting and high overturning moment applications.

  • HGH-HA: Square extended slider; HGW-HA: Flange extended slider

SA Short Slider (EG Low Assembly Series EGH-SA / EGW-SA)

a short, lightweight slider from the EG low-assembly series . It features a shorter slider length, fewer mounting holes, and a smaller overall size, taking up less space. Its load capacity is slightly lower than the standard CA, offering high cost-effectiveness and making it suitable for light-load, confined-space equipment.

  • EGH-SA: Square short slider; EGW-SA: Flange short slider

⚠️ Distinguishing features: HA belongs to HG (high assembly); SA belongs to EG (low assembly). The two cannot be used interchangeably on the same rail.

MG Miniature Linear Guide MGN / MGW

MG miniature guide rails are compact and available in MGN (narrow) and MGW (wide) versions . They feature a four-point contact ball bearing structure, capable of withstanding four-way loads, and a ball retainer to prevent ball loss when the slider is removed. Materials include bearing steel and full stainless steel; the stainless steel version is rust-resistant and suitable for humid and corrosive environments.

  • MGN: Narrow miniature slider, smallest in size;
  • MGW: Widened base miniature slider, stronger resistance to overturning torque, can be used independently on a single guide rail; Suffix C = standard short slider; H = extended miniature heavy-duty slider.

Precautions

HG.EG Standard Slider

1.Do not arbitrarily pull the slider completely out of the guide rail during handling and installation. Forcibly disassembling non-interchangeable models will result in loss of factory precision . EG models with cages are relatively safer, but should still be avoided as much as possible.

2.The flatness of the mounting base must meet the standard; an uneven base will directly damage the steel balls and shorten their lifespan.

3.Dust prevention: In dusty or metal shaving environments, be sure to install a dust cover/metal scraper; metal shavings entering the slider will quickly wear down the raceway.

4.Lubrication: The guide rail slider is pre-coated with grease at the factory; for high-speed and continuous operation, lithium-based grease needs to be added periodically through the slider grease nipple; dry running is prohibited.

5.Preload selection: Z0 No preload (light load), ZA Light preload, ZB Medium preload; select preload for high rigidity requirements, and select no preload for light load and high speed.

6.Precision grades: C (Ordinary), H (Advanced), P (Precision), SP (Ultra-precision), UP (Ultra-high precision); P/H are commonly used in machine tools, while C is the general grade for automation.

7.Do not strike the slider or guide rail raceway; tighten the fixing screws in stages diagonally, do not tighten one side at once.

8.Store in a dry, rust-proof environment. Apply anti-rust oil to the surface of the guide rails to protect them from impacts and scratches.

HA Extended Slider

1.HA can only be used with HG series HGR rails, not EG rails .

2.The extended slider is heavier, so the mounting base must be rigid enough; a soft base will cause vibration and noise.

3.It is not recommended to completely detach the slider from the guide rail, as detaching a non-interchangeable slider will result in a loss of factory matching accuracy.

4.Lubrication: Shorten the oiling cycle under heavy load conditions, and install a metal scraper in dusty environments.

SA short slider

1.SA is only compatible with EG series EGR low-mount guide rails and cannot be used with HG guide rails.

2.SA sliders are short in length, have a small support span, and are weak in resisting overturning, making them unsuitable for large eccentric loads .

3.The number of screws used for installation is small, and the tightening torque must be strictly in accordance with the specifications. Excessive force should be avoided to prevent stripping of the threads.

MG Miniature Rail

1.Miniature guide rails have tiny parts, so care must be taken to prevent them from being bumped or falling during handling and installation, as the steel balls are extremely easy to damage.

2.The stainless steel version is rust-proof, but its hardness is lower than that of bearing steel, so it should not be used for heavy loads.

3.Miniature guide rails should be kept away from iron filings and dust as much as possible; dustproof end caps are optional, as even a tiny speck of dust can affect smoothness.

4.Preload selection: Z0 No preload (general purpose), Z1 Light preload (precision); generally, miniature guide rails rarely have medium preload.

5.Do not strike the slider or guide rail raceway, as even minor scratches will directly affect accuracy.

General Precautions

1.Accuracy class: C (Standard) / H (High) / P (Precision);

2.Preload levels: Z0 No preload, ZA Light preload, ZB Medium preload;

3.Store in a dry environment, apply rust-preventive oil, and protect the raceway.

Installation Method

1.Cleaning: Clean the equipment base and bottom of the guide rails to remove burrs, iron filings, and oil stains.

2.Guide rail positioning: Place the guide rail on the positioning edge of the base and pre-tighten the fixing screws (do not fully tighten them).

3.Parallelism calibration: Use a dial indicator to calibrate the parallelism of the two guide rails to ensure that the parallelism of the two guide rails meets the standard.

4.Tighten the guide rail screws: Tighten the bolts diagonally in stages to prevent the guide rail from deforming.

5.Assemble the slider: Slowly push the slider into the guide rail, do not tilt or force it; then fix the worktable to the slider.

6.Tighten the workbench screws diagonally, in stages, to avoid stress on one side.

7.Manually drag the worktable back and forth to confirm that the movement is smooth without any jamming or obvious abnormal noise.

8.Add lubricating grease, install dustproof accessories, and conduct a no-load test run.

Usage Locations (Application Scenarios)

✅ HG .EG Series: CNC machining centers, milling machines, grinding machines, lathes, gantry milling machines, injection molding machines, heavy-duty gantry robots, stone cutting machines, heavy-duty conveyor platforms, and precision testing instruments. ✅ EG Series: Laser engraving machines, 3C automation equipment, pick-and-place robots, packaging machinery, semiconductor equipment, 3D equipment, small CNC equipment, and testing fixtures.

✅ HA Extended Heavy-Duty Slider: CNC machining centers, gantry milling machines, heavy-duty cutting machines, injection molding machines, heavy-duty gantry robots, large-scale testing equipment, heavy-duty tooling fixtures.

✅ SA Short Slider: Small automated equipment, pick-and-place mechanisms, small laser equipment, simple transplanting platforms, and space-efficient conveying mechanisms.

✅ MG Miniature Rails MGN/MGW: 3D printers, small laser marking machines, precision testing instruments, semiconductor micro-devices, optical equipment, medical equipment, small robots, camera movement modules.

Product Model and Dimensions (Unit: mm)

HGH=HG Square slider; HGW=HG Flange slider; EGH=EG Square slider; EGW=EG Flange slider; W_R = Guide rail width; H = Total combined height; W = Slider width; L = Slider length

HG High-Assembled HGH (Four-Square Slider, HGH-CA Standard Model)

Model Guide Rail Width W_R Combined Height H Slider Width W Slider Length L
HGH15CA 15 28 34 61.4
HGH20CA 20 30 44 77.4
HGH25CA 25 36 48 84
HGH30CA 30 42 60 97.4
HGH35CA 35 48 70 111.4
HGH45CA 45 60 86 134

HG High-Assembled HGW (Flange Slider, HGW-CA Standard Model)

Model Guide Rail Width W_R Combined Height H Slider Width W Slider Length L
HGW15CA 15 28 47 61.4
HGW20CA 20 30 63 77.4
HGW25CA 25 36 70 84
HGW30CA 30 42 90 97.4
HGW35CA 35 48 100 111.4
HGW45CA 45 60 120 134

EG Low-Assembly EGH (Four-Square Slider, EGH-CA Standard Model)

Model Guide Rail Width W_R Combined Height H Slider Width W Slider Length L
EGH15CA 15 twenty four 34 56.8
EGH20CA 20 26 42 69
EGH25CA 25 30 48 79
EGH30CA 30 36 60 90
EGH35CA 35 40 70 101

EG low-assembly EGW (flange slider, EGW-CA standard model)

Model Guide Rail Width W_R Combined Height H Slider Width W Slider Length L
EGW15CA 15 twenty four 47 56.8
EGW20CA 20 26 63 69
EGW25CA 25 30 70 79
EGW30CA 30 36 90 90
EGW35CA 35 40 100 101

HA Extended Heavy-Duty Slider (HG Series HGH-HA Square/HGW-HA Flange)

Model Guide Rail Width W_R Combined Height H Slider Width W Slider Length L
HGH20HA 20 30 44 95.4
HGH25HA 25 36 48 104
HGH30HA 30 42 60 120.4
HGH35HA 35 48 70 138.2
HGH45HA 45 60 86 164
HGW20HA 20 30 63 95.4
HGW25HA 25 36 70 104
HGW30HA 30 42 90 120.4
HGW35HA 35 48 100 138.2
HGW45HA 45 60 120 164

SA short slider (EG low assembly EGH-SA square/EGW-SA flange)

Model Guide Rail Width W_R Combined Height H Slider Width W Slider Length L
EGH15SA 15 twenty four 34 46.8
EGH20SA 20 26 42 54
EGH25SA 25 30 48 64
EGH30SA 30 36 60 73
EGW15SA 15 twenty four 47 46.8
EGW20SA 20 26 63 54
EGW25SA 25 30 70 64
EGW30SA 30 36 90 73

MG Miniature Rails: MGN (narrow type), MGW (wide type)

C = Standard short slider; H = Miniature extended heavy-duty slider

Model Guide Rail Width W_R Combined Height H Slider Width W Slider Length L
MGN7C 7 9 17 19.4
MGN7H 7 9 17 24.8
MGN9C 9 10 20 24
MGN9H 9 10 20 31
MGN12C 12 13 24 27.5
MGN12H 12 13 24 35.5
MGN15C 15 16 28 34
MGN15H 15 16 28 44
MGW7C 7 9 25 19.4
MGW7H 7 9 25 24.8
MGW9C 9 10 30 24
MGW9H 9 10 30 31
MGW12C 12 13 34 27.5
MGW12H 12 13 34 35.5
MGW15C 15 16 40 34
MGW15H 15 16 40 44

Note: HA extended heavy-duty slider and SA short slider have the same guide rail width, only the slider length changes; the guide rail length can be customized as needed.

Ask About This Bearing.

Send us your specifications and operating conditions to discuss whether this bearing suits your application.

Send inquiry