German JVAV Bearing

Send a message

Contact Us Inquiry

Product

Self-aligning ball bearings

Self-aligning ball bearings are a type of double-row rolling ball bearing. The outer ring raceway is spherical, and the inner ring has a double-row raceway. Two rows of steel balls are assembled between the inner and outer rings, providing self-aligning capability.

Request a Quote
Product Details

Product Introduction

Self-aligning ball bearings are a type of double-row rolling ball bearing. The outer ring raceway is spherical, and the inner ring has a double-row raceway. Two rows of steel balls are assembled between the inner and outer rings, providing self-aligning capability. This allows the inner ring to tilt relative to the outer ring by a maximum of approximately 2° to 3°, automatically compensating for coaxiality deviations caused by shaft deflection, machining errors, and misalignment during installation. They primarily bear radial loads and can also withstand a small amount of bidirectional axial loads, but cannot withstand pure axial loads. They have a low coefficient of friction and are suitable for medium- to high-speed operation. They are divided into two main categories:

  1. Cylindrical bore self-aligning ball bearing: directly mounted on the optical axis;
  2. Tapered bore self-aligning ball bearing (suffix K, taper 1:12): Installed with a locknut/removal sleeve for easy disassembly, assembly, and clearance adjustment; Optional configuration: with 2Z dust cover, 2RS rubber seals, pre-filled with grease for dust and water protection. Compliant with: GB/T281-2013, internationally recognized ISO standard.

Applicable Locations/Application Scenarios (Selling Points of Independent Websites)

Suitable for equipment where the shaft is easily bent and the bearing housing is difficult to ensure coaxiality:

  • Fan, ventilation fan, ventilator
  • Conveyor and conveyor belt equipment
  • Small and medium-sized motors
  • Textile machinery, woodworking machinery
  • agricultural machinery
  • Papermaking equipment
  • Ordinary mines, plastic machinery
  • Water pumps, low-noise instruments and equipment

Not recommended for: heavy-load impact, large pure axial load conditions (self-aligning roller bearings are recommended for this scenario).

Installation Method

1) Self-aligning ball bearing with cylindrical bore

  1. Clean the journal and bearing housing bore, remove burrs and rust, and measure the mating dimensions;
  2. Apply lubricant to the mating surfaces;
  3. Small interference fit: Press machine + copper bushing, only press the inner ring end face (for shaft installation); press the outer ring end face (for bearing housing installation), do not directly strike the steel balls and cage;
  4. Large interference fit: Hot fitting, heat the bearing to 80~100℃, do not heat with open flame, and assemble quickly;
  5. Do not tighten the bolts on the bearings at both ends of the same shaft. Rotate the shaft a few times to allow the bearings to automatically align, and then tighten them to secure them.
  6. Add grease and run the test run under no-load for 30–60 minutes, monitoring the temperature rise.

2) Conical hole (K type) + adapter sleeve installation

  1. Place the locking sleeve onto the optical shaft, and push the bearing into the locking sleeve;
  2. The rotating lock nut advances the bearing, and the interference fit is controlled by the reduction in
  3. After installation, measure the radial clearance to confirm that the clearance meets the standard.
  4. Locking and anti-loosening device.

Installation Core Principles

The force must be applied perpendicularly through the bearing end face, and the force can only be applied to the interference fit ring. It is strictly forbidden to transmit the impact force through the steel ball.

Usage & Maintenance Precautions

  1. Cleaning: Bearings are precision parts; dust and moisture can cause wear and corrosion. Sealed 2RS/2Z bearings should not be disassembled for cleaning. Open bearings should be cleaned and re-lubricated before assembly.
  2. Centering limitation: The tilt angle should not exceed 3°, otherwise it will significantly shorten the lifespan;
  3. Load limitations: Radial loads are the primary load; axial loads should not be excessive, and the load should not be subjected to axial force alone.
  4. Lubrication and maintenance: Grease lubrication requires regular grease replenishment; oil lubrication requires regular oil replacement; excessively high temperatures will accelerate grease aging.
  5. Impact is prohibited: Knocking or impact with heavy objects will cause indentations on the raceway and breakage of the steel balls;
  6. Storage: Store in a dry, dark place, lay flat, and do not stack or compress for extended periods; it is recommended to wear gloves when handling bearings to prevent rust from hand sweat.
  7. Fit selection: Select a tight fit for the rotating inner ring; select a looser fit for the rotating outer ring or if play compensation is required.
  8. Clearance selection: standard CN clearance; C3 large clearance is selected for high temperature and large interference conditions.

Commonly Used Model Dimensions Table (d = inner diameter, D = outer diameter, B = width, unit mm)

Model (K = conical bore) | d Inner diameter | D Outer diameter | B Width | r Minimum chamfer | Cr Basic dynamic load (kN) | Cor Basic static load (kN) | Grease-lubricated limiting speed (rpm) | Reference weight (kg) Optional suffixes: 2RS double-sided adhesive seal / 2Z double-sided iron dust cover; K = 1:12 conical bore, with locking sleeve

12 Series (Narrow Self-Aligning Ball Bearings)

Model d D B r Cr Cor Grease Rotation Speed Weight (kg)
1200 10 26 8 0.3 5.55 1.19 18000 0.033
1201 12 30 9 0.3 5.70 1.27 17000 0.039
1202 15 35 11 0.3 5.85 2.05 15000 0.051
1203 17 40 12 0.3 6.10 2.40 12000 0.076
1204 20 47 14 0.6 7.70 3.20 10000 0.120
1205 25 52 15 0.6 9.30 4.00 9000 0.140
1206 30 62 16 1.0 12.20 5.80 7500 0.230
1207 35 72 17 1.0 12.20 6.60 6700 0.320
1208 40 80 18 1.0 14.80 8.50 6300 0.410
1209 45 85 19 1.0 17.20 9.80 5600 0.470
1210 50 90 20 1.0 17.80 10.80 5300 0.525
1211 55 100 21 1.5 21.00 13.20 4800 0.710
1212 60 110 22 1.5 24.20 15.50 4300 0.870
1213 65 120 23 1.5 26.80 17.80 4000 1.100
1214 70 125 24 1.5 27.80 19.20 3600 1.200
1215 75 130 25 1.5 30.80 21.50 3400 1.320
1216 80 140 26 2.0 33.00 23.50 3000 1.650
1217 85 150 28 2.0 39.50 27.50 2800 2.100
1218 90 160 30 2.0 44.20 31.80 2600 2.500
1219 95 170 32 2.0 49.00 35.80 2400 3.000
1220 100 180 34 2.0 57.20 42.20 2200 3.700

22 series (wide self-aligning ball bearings, thicker than the 12 series)

Model d D B r Cr Cor Grease Rotation Speed Weight (kg)
2200 10 30 14 0.3 7.12 1.58 17000 0.042
2201 12 32 14 0.3 8.80 1.80 16000 0.048
2202 15 35 14 0.3 7.65 1.80 14000 0.055
2203 17 40 16 0.3 9.90 2.45 12000 0.085
2204 20 47 18 0.6 9.95 2.65 11000 0.150
2205 25 52 18 0.6 12.00 3.30 9500 0.180
2206 30 62 20 1.0 15.20 4.60 8500 0.260
2207 35 72 23 1.0 21.50 6.60 7500 0.392
2208 40 80 23 1.0 24.80 8.00 6700 0.510
2209 45 85 23 1.0 27.20 9.20 6000 0.550
2210 50 90 23 1.0 27.80 10.00 5600 0.590
2211 55 100 25 1.5 34.00 13.00 5000 0.810
2212 60 110 28 1.5 39.50 15.20 4500 1.100
2213 65 120 31 1.5 44.20 17.80 4000 1.450
2214 70 125 31 1.5 44.80 19.20 3800 1.520
2215 75 130 31 1.5 47.50 21.20 3600 1.600
2216 80 140 33 2.0 54.20 24.50 3200 2.000
2217 85 150 36 2.0 61.80 28.50 3000 2.500
2218 90 160 40 2.0 69.50 33.80 2800 3.200
2219 95 170 43 2.0 78.00 38.50 2600 4.000
2220 100 180 46 2.0 88.50 45.20 2400 4.900

13 series (larger outer diameter, load capacity higher than 12 and 22)

Model d D B r Cr Cor Grease Rotation Speed Weight (kg)
1300 10 35 11 0.6 9.42 2.12 18000 0.058
1301 12 37 12 0.6 9.80 2.30 17000 0.065
1302 15 42 13 0.6 10.50 2.60 15000 0.080
1303 17 47 14 0.6 12.50 3.15 13000 0.110
1304 20 52 15 0.6 14.20 3.80 11000 0.140
1305 25 62 17 1.0 17.90 5.00 9600 0.249
1306 30 72 19 1.0 21.00 6.80 8000 0.340
1307 35 80 21 1.0 25.80 8.50 7100 0.460
1308 40 90 23 1.0 30.50 10.80 6300 0.640
1309 45 100 25 1.0 36.00 13.20 5600 0.840
1310 50 110 27 1.5 43.00 16.50 5000 1.120
1311 55 120 29 1.5 49.50 19.80 4500 1.450
1312 60 130 31 1.5 57.20 23.50 4000 1.850
1313 65 140 33 2.0 61.80 26.50 3800 2.300
1314 70 150 35 2.0 69.50 30.80 3400 2.800
1315 75 160 37 2.0 76.80 35.00 3200 3.400
1316 80 170 39 2.0 86.50 40.00 3000 4.100
1317 85 180 41 2.0 94.80 45.00 2800 4.800
1318 90 190 43 2.0 102.00 50.80 2600 5.600
1319 95 200 45 2.0 110.00 57.20 2400 6.500
1320 100 215 47 2.0 122.00 64.20 2200 7.700

23 Series (Extra-wide, the highest load-bearing model among self-aligning ball bearings)

Model d D B r Cr Cor Grease Rotation Speed Weight (kg)
2300 10 35 17 0.6 12.50 2.72 17000 0.083
2301 12 37 17 0.6 13.20 2.95 16000 0.090
2302 15 42 17 0.6 13.80 3.25 14000 0.105
2303 17 47 19 0.6 16.80 3.95 12000 0.140
2304 20 52 21 0.6 18.80 4.70 10500 0.190
2305 25 62 24 1.0 24.20 6.55 9000 0.320
2306 30 72 27 1.0 29.80 8.80 7500 0.470
2307 35 80 31 1.0 37.80 11.50 6700 0.680
2308 40 90 33 1.0 44.80 13.40 6000 0.950
2309 45 100 36 1.0 51.80 16.80 5300 1.250
2310 50 110 40 1.5 60.50 20.80 4800 1.640
2311 55 120 43 1.5 68.20 24.80 4300 2.100
2312 60 130 46 1.5 76.80 29.50 3800 2.600
2313 65 140 48 2.0 84.50 34.00 3600 3.200
2314 70 150 51 2.0 91.80 38.50 3200 3.900
2315 75 160 55 2.0 102.00 44.20 3000 4.700
2316 80 170 58 2.0 112.00 50.20 2800 5.600
2317 85 180 60 2.0 120.00 56.50 2600 6.500
2318 90 190 64 2.0 130.00 63.80 2400 7.600
2319 95 200 67 2.0 142.00 72.00 2200 8.800
2320 100 215 73 2.0 162.00 81.80 2000 10.600

Series Description:

  • 12 Series: Narrow Width Self-Aligning Ball Bearings
  • 22 Series: Wide-type self-aligning ball bearings
  • 13 Series: Thickened outer diameter for higher load capacity
  • 23 Series: Wide and thickened, maximum load capacity

Ask About This Bearing.

Send us your specifications and operating conditions to discuss whether this bearing suits your application.

Send inquiry