Product
Angular contact bearing
Single-row angular contact ball bearings consist of inner ring, outer ring, steel balls and cage. They support combined radial and unidirectional axial loads.Normally used in pairs to take bidirectional thrust load-Contact angle options: 15°(C) for high-speed; 25°(AC) general purpose; 40°(B) heavy thrust load.
Single-row angular contact ball bearings (7000/7200/7300 series)
Code name explanation:
- d: Inner diameter (mm); D: Outer diameter (mm); B: Width (mm)
- Cr: Basic rated dynamic load (kN); C0r: Basic rated static load (kN)
- Grease: Limiting speed for grease lubrication (rpm); Oil: Limiting speed for oil lubrication (rpm)
- Suffixes: C = 15° contact angle; AC = 25° contact angle; B = 40° contact angle
- Can be installed in pairs: DF face-to-face, DB back-to-back, DT tandem pairing; a single bearing can only withstand unidirectional axial force.
Product Description
1.Single-row angular contact ball bearings consist of inner ring, outer ring, steel balls and cage. They support combined radial and unidirectional axial loads. Normally used in pairs to take bidirectional thrust load-Contact angle options: 15°(C) for high-speed; 25°(AC) general purpose; 40°(B) heavy thrust load. Larger contact angle gives higher axial capacity but lower speed limit.
2.Non-separable rings. Mounted in DF(face-to-face), DB(back-to-back), DT(tandem) sets. Preload can be applied for higher rigidity & running accuracy.
3.Cage types: stamped steel, machined brass, nylon. Precision grades P0 / P6 / P5 / P4.
4.Open, shielded or sealed versions available. Grease or circulating-oil lubrication for high-speed operation.
Applications
Machine tool spindles, grinding heads; centrifugal pumps, hydraulic pumps, air compressors; gearboxes, automotive transmissions; high-speed & servo motors; fans, centrifuges, woodworking & textile machinery.
Selection tips: C(15°) for high-speed; AC(25°) general-use; B(40°) for heavy thrust. Use paired mounting for bidirectional axial load.
Installation Instructions
⚠️Do not strike the steel balls; force should only be applied to the inner or outer ring end faces; preload needs to be controlled for mated bearings .
1.Inspection: Check bearing, shaft and housing for damage, confirm matching arrangement DB/DF/DT.
2.Press-fit inner ring onto shaft: apply force only to inner-ring face. Max heating temperature 120 °C, no open flame.
3.Press-fit outer ring into housing: apply force only on outer-ring end face. Never apply pressure through balls.
4.Mount paired sets: DB(back-to-back for moment rigidity); DF(face-to-face for shaft deflection); DT(tandem for higher unidirectional thrust).
5.Preload adjustment: Control preload for precision spindles. Avoid excessive preload which will cause over-heating and premature failure.
6.Fill proper grease during assembly. Prepare oil circuit for high-speed circulating-oil lubrication.
⚠️Important Prohibitions: It is strictly forbidden to strike the steel balls. Assembly pressure is only allowed to be applied to the end face of the inner ring or the end face of the outer ring. The preload of mating bearings must be controlled. Excessive preload can easily cause the bearing to burn out due to high temperature.
1.Before assembly, inspect the bearings, shafts, bearing housings, raceways, and steel balls for any bumps, rust, or burrs; confirm the bearing precision grade and contact angle type; confirm the pairing type as DB (back-to-back), DF (face-to-face), or DT (tandem); ensure that the dimensional and geometric tolerances of the shaft and housing conform to the design drawings.
Do not remove the sealing cover of the 2RS sealed bearing. Removing it will damage the internal pre-filled grease and directly affect its lifespan.
2.The inner ring is press-fitted onto the shaft . The press-fitting tool only contacts the end face of the inner ring . When the interference fit is large, the shaft can be induction heated, with a heating temperature ≤120℃. Direct heating of the bearing with an open flame is prohibited, as excessively high temperatures will cause tempering and bearing hardness failure.
3.When press-fitting the outer ring into the bearing housing, the press-fitting tool should only contact the end face of the outer ring; assembly pressure must never be transmitted through the steel ball . During interference fit assembly of the housing, the housing should be heated, but the maximum temperature should not exceed 120℃.
Key points for assembling paired bearings
- DB back-to-back pairing: large span of fulcrum, good resistance to overturning moment, suitable for bending moment conditions;
- DF face-to-face pairing: small span between fulcrums, allowing for a certain axial flexural deformation;
- DT series pairing: Multiple sets are arranged in the same direction to withstand greater unidirectional axial loads;
When using paired bearings, prioritize using sets of paired bearings from the same batch; do not arbitrarily disassemble different individual bearings and combine them freely.
clearing and preload adjustment requires precise preload adjustment. In ordinary industrial conditions, controlling the axial clearing appropriately and avoiding excessive preload is crucial . Excessive preload leads to rapid overheating during operation, causing bearings to burn out quickly; insufficient preload reduces rigidity and increases vibration and noise.
lubricating the bearing during assembly, add an appropriate amount of grease. The grease filling amount is generally 1/3 to 2/3 of the internal space of the bearing. In high-speed operation, the amount of grease should be halved, as too much grease will cause high-speed stirring and heat generation. In oil lubrication operation, ensure that the oil passage and grease nipple are unobstructed.
Maintenance & Cautions
- Single bearing can only take one-direction axial force, use paired sets for bidirectional thrust. Avoid shock loads.
- Control preload: Over-preload causes over-heat; insufficient preload reduces rigidity. Re-check preload periodically for precision equipment.
- Lubrication: Use lithium-base grease for general use. Do not over-grease for high- Circulating oil recommended for high-speed condition.
- Use sealed-type(2RS) plus extra seals for dusty or wet environment. Contamination leads to raceway pitting.
- Do not mix components from different matched bearing sets.
- Store in original package under dry condition. Protect P4/P5 precision bearings from vibration.
Table of commonly used size parameters (7200AC, 7300AC series, 25° contact angle AC universal model)
Parameter Description
d: Inner diameter (mm) | D: Outer diameter (mm) | B: Width (mm) Cr: Basic rated dynamic load (kN) | C0r: Basic rated static load (kN) Grease: Grease-lubricated limiting speed (rpm) | Oil: Oil-lubricated limiting speed (rpm) | Weight (g) C=15° Contact angle (high speed); AC=25° Contact angle (general purpose); B=40° Contact angle (maximum axial thrust)
7000 Series (Thin-walled High-speed type)
| Model | d(mm) | D(mm) | B(mm) | Cr(kN) | C0r(kN) | Grease (rpm) | Oil (rpm) | Weight (g) |
| 7002AC | 15 | 32 | 9 | 7.6 | 4.5 | 22000 | 30000 | 34 |
| 7002C | 15 | 32 | 9 | 7.9 | 4.7 | 24000 | 32000 | 34 |
| 7003AC | 17 | 35 | 10 | 8.4 | 5.3 | 20000 | 27000 | 40 |
| 7003C | 17 | 35 | 10 | 8.8 | 5.5 | 22000 | 29000 | 40 |
| 7004AC | 20 | 42 | 12 | 10.5 | 6.8 | 18000 | 24000 | 58 |
| 7004C | 20 | 42 | 12 | 11.0 | 7.0 | 20000 | 26000 | 58 |
| 7005AC | 25 | 47 | 12 | 11.2 | 7.8 | 16000 | 22000 | 66 |
| 7005C | 25 | 47 | 12 | 11.6 | 8.0 | 18000 | 24000 | 66 |
| 7006AC | 30 | 55 | 13 | 13.2 | 9.5 | 14000 | 19000 | 86 |
| 7006C | 30 | 55 | 13 | 13.8 | 9.8 | 16000 | 21000 | 86 |
| 7007AC | 35 | 62 | 14 | 16.2 | 11.8 | 12000 | 17000 | 110 |
| 7007C | 35 | 62 | 14 | 16.8 | 12.2 | 14000 | 19000 | 110 |
| 7008AC | 40 | 68 | 15 | 17.0 | 13.2 | 11000 | 15000 | 130 |
| 7008C | 40 | 68 | 15 | 17.8 | 13.6 | 12500 | 17000 | 130 |
| 7009AC | 45 | 75 | 16 | 20.5 | 16.0 | 10000 | 13000 | 160 |
| 7009C | 45 | 75 | 16 | 21.2 | 16.5 | 11000 | 14500 | 160 |
| 7010AC | 50 | 80 | 16 | 21.0 | 17.5 | 9000 | 12000 | 175 |
| 7010C | 50 | 80 | 16 | 21.8 | 18.0 | 10000 | 13000 | 175 |
| 7011AC | 55 | 90 | 18 | 27.5 | 22.0 | 8000 | 10000 | 240 |
| 7011C | 55 | 90 | 18 | 28.5 | 22.8 | 9000 | 11500 | 240 |
| 7012AC | 60 | 95 | 18 | 28.2 | 23.5 | 7500 | 9500 | 255 |
| 7012C | 60 | 95 | 18 | 29.2 | 24.2 | 8200 | 10500 | 255 |
| 7013AC | 65 | 100 | 18 | 29.0 | 25.0 | 7000 | 9000 | 270 |
| 7013C | 65 | 100 | 18 | 30.0 | 25.8 | 7600 | 9800 | 270 |
| 7014AC | 70 | 110 | 20 | 35.2 | 30.5 | 6300 | 8000 | 360 |
| 7014C | 70 | 110 | 20 | 36.4 | 31.5 | 6800 | 8600 | 360 |
| 7015AC | 75 | 115 | 20 | 36.0 | 32.0 | 6000 | 7500 | 380 |
| 7015C | 75 | 115 | 20 | 37.2 | 33.0 | 6400 | 8000 | 380 |
| 7016AC | 80 | 125 | 22 | 42.5 | 37.5 | 5300 | 6700 | 490 |
| 7016C | 80 | 125 | 22 | 44.0 | 38.8 | 5600 | 7100 | 490 |
| 7017AC | 85 | 130 | 22 | 44.0 | 40.0 | 5000 | 6300 | 520 |
| 7017C | 85 | 130 | 22 | 45.6 | 41.2 | 5300 | 6700 | 520 |
| 7018AC | 90 | 140 | 24 | 51.8 | 46.5 | 4800 | 6000 | 650 |
| 7018C | 90 | 140 | 24 | 53.6 | 47.8 | 5000 | 6300 | 650 |
| 7019AC | 95 | 145 | 24 | 53.0 | 48.5 | 4500 | 5600 | 680 |
| 7019C | 95 | 145 | 24 | 54.8 | 49.8 | 4700 | 5900 | 680 |
| 7020AC | 100 | 150 | 24 | 54.2 | 51.0 | 4300 | 5300 | 710 |
| 7020C | 100 | 150 | 24 | 56.0 | 52.5 | 4400 | 5500 | 710 |
| 7021C | 105 | 160 | 26 | 62.0 | 57.5 | 4100 | 5200 | 830 |
| 7022C | 110 | 170 | 28 | 68.5 | 63.8 | 3800 | 4900 | 970 |
| 7023C | 115 | 175 | 28 | 70.5 | 66.0 | 3600 | 4600 | 1020 |
| 7024C | 120 | 180 | 28 | 72.0 | 68.5 | 3400 | 4400 | 1070 |
7200 Series (General Purpose Medium Cross-Section)
| Model | d(mm) | D(mm) | B(mm) | Cr(kN) | C0r(kN) | Grease (rpm) | Oil (rpm) | Weight (g) |
| 7202AC | 15 | 35 | 11 | 8.2 | 5.2 | 19000 | 26000 | 44 |
| 7202B | 15 | 35 | 11 | 7.8 | 5.8 | 16000 | 22000 | 44 |
| 7203AC | 17 | 40 | 12 | 10.8 | 6.8 | 17000 | 23000 | 62 |
| 7203B | 17 | 40 | 12 | 10.2 | 7.5 | 14500 | 20000 | 62 |
| 7204AC | 20 | 47 | 14 | 14.2 | 8.5 | 15000 | 20000 | 110 |
| 7204B | 20 | 47 | 14 | 13.4 | 9.4 | 13000 | 17500 | 110 |
| 7205AC | 25 | 52 | 15 | 16.5 | 10.5 | 13000 | 17000 | 130 |
| 7205B | 25 | 52 | 15 | 15.6 | 11.6 | 11500 | 15000 | 130 |
| 7206AC | 30 | 62 | 16 | 23.0 | 14.2 | 11000 | 15000 | 190 |
| 7206B | 30 | 62 | 16 | 21.8 | 15.6 | 9800 | 13000 | 190 |
| 7207AC | 35 | 72 | 17 | 30.5 | 18.8 | 9500 | 13000 | 260 |
| 7207B | 35 | 72 | 17 | 29.0 | 20.7 | 8400 | 11200 | 260 |
| 7208AC | 40 | 80 | 18 | 36.8 | 24.0 | 8500 | 11000 | 330 |
| 7208B | 40 | 80 | 18 | 34.8 | 26.4 | 7500 | 9800 | 330 |
| 7209AC | 45 | 85 | 19 | 38.5 | 25.8 | 7500 | 10000 | 380 |
| 7209B | 45 | 85 | 19 | 36.5 | 28.4 | 6700 | 8800 | 380 |
| 7210AC | 50 | 90 | 20 | 42.8 | 29.5 | 7000 | 9000 | 430 |
| 7210B | 50 | 90 | 20 | 40.6 | 32.4 | 6000 | 7800 | 430 |
| 7211AC | 55 | 100 | 21 | 50.5 | 37.2 | 6300 | 8000 | 550 |
| 7211B | 55 | 100 | 21 | 47.8 | 40.8 | 5400 | 6900 | 550 |
| 7212AC | 60 | 110 | 22 | 58.2 | 44.5 | 5600 | 7200 | 680 |
| 7212B | 60 | 110 | 22 | 55.0 | 48.8 | 4800 | 6200 | 680 |
| 7213AC | 65 | 120 | 23 | 65.0 | 51.0 | 5000 | 6300 | 820 |
| 7213B | 65 | 120 | 23 | 61.4 | 56.0 | 4300 | 5500 | 820 |
| 7214AC | 70 | 125 | 24 | 69.2 | 56.0 | 4800 | 6000 | 900 |
| 7214B | 70 | 125 | 24 | 65.4 | 61.6 | 4000 | 5200 | 900 |
| 7215AC | 75 | 130 | 25 | 72.0 | 60.5 | 4500 | 5600 | 980 |
| 7215B | 75 | 130 | 25 | 68.0 | 66.6 | 3700 | 4800 | 980 |
| 7216AC | 80 | 140 | 26 | 81.8 | 69.5 | 4000 | 5000 | 1150 |
| 7216B | 80 | 140 | 26 | 77.4 | 76.4 | 3400 | 4400 | 1150 |
| 7217AC | 85 | 150 | 28 | 93.5 | 78.0 | 3800 | 4800 | 1400 |
| 7217B | 85 | 150 | 28 | 88.2 | 85.8 | 3100 | 4000 | 1400 |
| 7218AC | 90 | 160 | 30 | 105 | 88.0 | 3600 | 4500 | 1650 |
| 7218B | 90 | 160 | 30 | 99.0 | 96.8 | 2900 | 3700 | 1650 |
| 7219AC | 95 | 170 | 32 | 118 | 99.0 | 3400 | 4300 | 1920 |
| 7219B | 95 | 170 | 32 | 111 | 109 | 2700 | 3500 | 1920 |
| 7220AC | 100 | 180 | 34 | 132 | 112 | 3200 | 4000 | 2220 |
| 7220B | 100 | 180 | 34 | 124 | 123 | 2500 | 3200 | 2220 |
| 7221B | 105 | 190 | 36 | 138 | 136 | 2300 | 3000 | 2580 |
| 7222B | 110 | 200 | 38 | 152 | 151 | 2100 | 2800 | 2950 |
| 7223B | 115 | 210 | 40 | 165 | 166 | 2000 | 2600 | 3340 |
| 7224B | 120 | 215 | 40 | 172 | 174 | 1900 | 2400 | 3520 |
7300 Series (Thick Section Heavy Duty Type)
| Model | d(mm) | D(mm) | B(mm) | Cr(kN) | C0r(kN) | Grease (rpm) | Oil (rpm) | Weight (g) |
| 7302AC | 15 | 42 | 13 | 12.8 | 7.8 | 16000 | 22000 | 80 |
| 7302B | 15 | 42 | 13 | 12.0 | 8.6 | 13500 | 18500 | 80 |
| 7303AC | 17 | 47 | 14 | 15.8 | 9.5 | 14000 | 19000 | 105 |
| 7303B | 17 | 47 | 14 | 14.8 | 10.4 | 12000 | 16000 | 105 |
| 7304AC | 20 | 52 | 15 | 19.2 | 11.5 | 13000 | 17000 | 150 |
| 7304B | 20 | 52 | 15 | 18.0 | 12.6 | 11000 | 14500 | 150 |
| 7305AC | 25 | 62 | 17 | 27.2 | 15.8 | 11000 | 14000 | 220 |
| 7305B | 25 | 62 | 17 | 25.4 | 17.4 | 9200 | 12000 | 220 |
| 7306AC | 30 | 72 | 19 | 34.2 | 20.8 | 9000 | 12000 | 320 |
| 7306B | 30 | 72 | 19 | 32.0 | 22.9 | 7800 | 10200 | 320 |
| 7307AC | 35 | 80 | 21 | 40.8 | 26.5 | 8000 | 10000 | 420 |
| 7307B | 35 | 80 | 21 | 38.2 | 29.2 | 6900 | 9000 | 420 |
| 7308AC | 40 | 90 | 23 | 50.5 | 33.2 | 7000 | 9000 | 560 |
| 7308B | 40 | 90 | 23 | 47.2 | 36.5 | 6100 | 7900 | 560 |
| 7309AC | 45 | 100 | 25 | 60.8 | 41.0 | 6300 | 8000 | 720 |
| 7309B | 45 | 100 | 25 | 56.8 | 45.1 | 5400 | 7000 | 720 |
| 7310AC | 50 | 110 | 27 | 71.0 | 49.5 | 5600 | 7200 | 910 |
| 7310B | 50 | 110 | 27 | 66.4 | 54.4 | 4800 | 6200 | 910 |
| 7311AC | 55 | 120 | 29 | 80.2 | 58.0 | 5000 | 6300 | 1120 |
| 7311B | 55 | 120 | 29 | 74.8 | 63.8 | 4300 | 5500 | 1120 |
| 7312AC | 60 | 130 | 31 | 90.8 | 68.2 | 4500 | 5600 | 1380 |
| 7312B | 60 | 130 | 31 | 84.8 | 75.0 | 3900 | 5000 | 1380 |
| 7313AC | 65 | 140 | 33 | 102 | 78.5 | 4000 | 5000 | 1650 |
| 7313B | 65 | 140 | 33 | 95.2 | 86.4 | 3500 | 4500 | 1650 |
| 7314AC | 70 | 150 | 35 | 112 | 88.0 | 3800 | 4800 | 1950 |
| 7314B | 70 | 150 | 35 | 104 | 96.8 | 3200 | 4200 | 1950 |
| 7315AC | 75 | 160 | 37 | 122 | 98.0 | 3600 | 4500 | 2280 |
| 7315B | 75 | 160 | 37 | 114 | 108 | 3000 | 3900 | 2280 |
| 7316AC | 80 | 170 | 39 | 132 | 108 | 3400 | 4300 | 2640 |
| 7316B | 80 | 170 | 39 | 124 | 119 | 2800 | 3600 | 2640 |
| 7317AC | 85 | 180 | 41 | 142 | 120 | 3200 | 4000 | 3030 |
| 7317B | 85 | 180 | 41 | 133 | 132 | 2600 | 3300 | 3030 |
| 7318AC | 90 | 190 | 43 | 152 | 132 | 3000 | 3800 | 3450 |
| 7318B | 90 | 190 | 43 | 143 | 145 | 2400 | 3100 | 3450 |
| 7319AC | 95 | 200 | 45 | 162 | 145 | 2800 | 3600 | 3900 |
| 7319B | 95 | 200 | 45 | 152 | 159 | 2200 | 2900 | 3900 |
| 7320AC | 100 | 215 | 47 | 175 | 160 | 2600 | 3400 | 4500 |
| 7320B | 100 | 215 | 47 | 165 | 175 | 2100 | 2700 | 4500 |
| 7321B | 105 | 225 | 49 | 185 | 188 | 1900 | 2500 | 5100 |
| 7322B | 110 | 240 | 50 | 202 | 208 | 1800 | 2300 | 5850 |
| 7323B | 115 | 250 | 52 | 215 | 225 | 1700 | 2200 | 6500 |
| 7324B | 120 | 260 | 55 | 232 | 248 | 1600 | 2000 | 7300 |
7000 series: Thin-section angular contact ball bearings, compact cross-section for high speed and limited mounting space.7200 series: General-purpose angular contact ball bearings, balanced load capacity and speed, best-selling type.7300 series: Heavy cross-section, higher load capacity for heavy combined radial and axial loads.Contact angle: C(15°) for high speed; AC(25°) general use; B(40°) heavy thrust load.