Product
Linear guide rail
HG high-assembly linear guide : Four-row 45° single-arc ball bearing structure, high assembly height, heavy-duty high rigidity, four-way equal load, self-aligning, absorbs mounting surface errors, supports high-speed precision reciprocating motion , strong anti-overturning moment, suitable for heavy cutting and high-load conditions.
Product Introduction
HG high-assembly linear guide
HG high-assembly linear guide : Four-row 45° single-arc ball bearing structure, high assembly height, heavy-duty high rigidity, four-way equal load, self-aligning, absorbs mounting surface errors, supports high-speed precision reciprocating motion , strong anti-overturning moment, suitable for heavy cutting and high-load conditions. Available in square HGH and flange HGW sliders, and in interchangeable/non-interchangeable paired types .
EG low-profile linear guide
EG Low-profile linear guides: Low-profile, compact four-row ball guides with lower overall height and shorter sliders, providing equal load in four directions. They are also self-aligning , occupy less equipment space, and offer high cost-effectiveness, making them suitable for space-constrained automation equipment. Available in square EGH and flange EGW sliders, each with a ball retainer, ensuring the balls won’t fall out when the slider is removed and providing good interchangeability.
Material: The guide rail and slider body are made of bearing steel, quenched and ground; ball bearing steel; standard dustproof end cover, metal scraper can be added.
Key differences between HG and EG : HG: High assembly height, larger size, greater load capacity, stronger rigidity, better anti-tipping properties; preferred for heavy-duty machine tools. EG: Low assembly height, compact structure, moderate load capacity; preferred for automation, engraving machines, and small equipment.
HA Extended Heavy-Duty Slider (HG High Assembly Series HGH-HA / HGW-HA)
HA belongs to the HG high-assembly series of extended heavy-duty sliders . The slider body is longer, and the number of ball circulation loops is increased, resulting in significantly improved rated load and overturning moment compared to the standard CA slider, along with greater rigidity. It features four rows of 45° ball bearings, equal load capacity in four directions, and self-aligning design; suitable for heavy-duty cutting and high overturning moment applications.
- HGH-HA: Square extended slider; HGW-HA: Flange extended slider
SA Short Slider (EG Low Assembly Series EGH-SA / EGW-SA)
a short, lightweight slider from the EG low-assembly series . It features a shorter slider length, fewer mounting holes, and a smaller overall size, taking up less space. Its load capacity is slightly lower than the standard CA, offering high cost-effectiveness and making it suitable for light-load, confined-space equipment.
- EGH-SA: Square short slider; EGW-SA: Flange short slider
⚠️ Distinguishing features: HA belongs to HG (high assembly); SA belongs to EG (low assembly). The two cannot be used interchangeably on the same rail.
MG Miniature Linear Guide MGN / MGW
MG miniature guide rails are compact and available in MGN (narrow) and MGW (wide) versions . They feature a four-point contact ball bearing structure, capable of withstanding four-way loads, and a ball retainer to prevent ball loss when the slider is removed. Materials include bearing steel and full stainless steel; the stainless steel version is rust-resistant and suitable for humid and corrosive environments.
- MGN: Narrow miniature slider, smallest in size;
- MGW: Widened base miniature slider, stronger resistance to overturning torque, can be used independently on a single guide rail; Suffix C = standard short slider; H = extended miniature heavy-duty slider.
Precautions
HG.EG Standard Slider
1.Do not arbitrarily pull the slider completely out of the guide rail during handling and installation. Forcibly disassembling non-interchangeable models will result in loss of factory precision . EG models with cages are relatively safer, but should still be avoided as much as possible.
2.The flatness of the mounting base must meet the standard; an uneven base will directly damage the steel balls and shorten their lifespan.
3.Dust prevention: In dusty or metal shaving environments, be sure to install a dust cover/metal scraper; metal shavings entering the slider will quickly wear down the raceway.
4.Lubrication: The guide rail slider is pre-coated with grease at the factory; for high-speed and continuous operation, lithium-based grease needs to be added periodically through the slider grease nipple; dry running is prohibited.
5.Preload selection: Z0 No preload (light load), ZA Light preload, ZB Medium preload; select preload for high rigidity requirements, and select no preload for light load and high speed.
6.Precision grades: C (Ordinary), H (Advanced), P (Precision), SP (Ultra-precision), UP (Ultra-high precision); P/H are commonly used in machine tools, while C is the general grade for automation.
7.Do not strike the slider or guide rail raceway; tighten the fixing screws in stages diagonally, do not tighten one side at once.
8.Store in a dry, rust-proof environment. Apply anti-rust oil to the surface of the guide rails to protect them from impacts and scratches.
HA Extended Slider
1.HA can only be used with HG series HGR rails, not EG rails .
2.The extended slider is heavier, so the mounting base must be rigid enough; a soft base will cause vibration and noise.
3.It is not recommended to completely detach the slider from the guide rail, as detaching a non-interchangeable slider will result in a loss of factory matching accuracy.
4.Lubrication: Shorten the oiling cycle under heavy load conditions, and install a metal scraper in dusty environments.
SA short slider
1.SA is only compatible with EG series EGR low-mount guide rails and cannot be used with HG guide rails.
2.SA sliders are short in length, have a small support span, and are weak in resisting overturning, making them unsuitable for large eccentric loads .
3.The number of screws used for installation is small, and the tightening torque must be strictly in accordance with the specifications. Excessive force should be avoided to prevent stripping of the threads.
MG Miniature Rail
1.Miniature guide rails have tiny parts, so care must be taken to prevent them from being bumped or falling during handling and installation, as the steel balls are extremely easy to damage.
2.The stainless steel version is rust-proof, but its hardness is lower than that of bearing steel, so it should not be used for heavy loads.
3.Miniature guide rails should be kept away from iron filings and dust as much as possible; dustproof end caps are optional, as even a tiny speck of dust can affect smoothness.
4.Preload selection: Z0 No preload (general purpose), Z1 Light preload (precision); generally, miniature guide rails rarely have medium preload.
5.Do not strike the slider or guide rail raceway, as even minor scratches will directly affect accuracy.
General Precautions
1.Accuracy class: C (Standard) / H (High) / P (Precision);
2.Preload levels: Z0 No preload, ZA Light preload, ZB Medium preload;
3.Store in a dry environment, apply rust-preventive oil, and protect the raceway.
Installation Method
1.Cleaning: Clean the equipment base and bottom of the guide rails to remove burrs, iron filings, and oil stains.
2.Guide rail positioning: Place the guide rail on the positioning edge of the base and pre-tighten the fixing screws (do not fully tighten them).
3.Parallelism calibration: Use a dial indicator to calibrate the parallelism of the two guide rails to ensure that the parallelism of the two guide rails meets the standard.
4.Tighten the guide rail screws: Tighten the bolts diagonally in stages to prevent the guide rail from deforming.
5.Assemble the slider: Slowly push the slider into the guide rail, do not tilt or force it; then fix the worktable to the slider.
6.Tighten the workbench screws diagonally, in stages, to avoid stress on one side.
7.Manually drag the worktable back and forth to confirm that the movement is smooth without any jamming or obvious abnormal noise.
8.Add lubricating grease, install dustproof accessories, and conduct a no-load test run.
Usage Locations (Application Scenarios)
✅ HG .EG Series: CNC machining centers, milling machines, grinding machines, lathes, gantry milling machines, injection molding machines, heavy-duty gantry robots, stone cutting machines, heavy-duty conveyor platforms, and precision testing instruments. ✅ EG Series: Laser engraving machines, 3C automation equipment, pick-and-place robots, packaging machinery, semiconductor equipment, 3D equipment, small CNC equipment, and testing fixtures.
✅ HA Extended Heavy-Duty Slider: CNC machining centers, gantry milling machines, heavy-duty cutting machines, injection molding machines, heavy-duty gantry robots, large-scale testing equipment, heavy-duty tooling fixtures.
✅ SA Short Slider: Small automated equipment, pick-and-place mechanisms, small laser equipment, simple transplanting platforms, and space-efficient conveying mechanisms.
✅ MG Miniature Rails MGN/MGW: 3D printers, small laser marking machines, precision testing instruments, semiconductor micro-devices, optical equipment, medical equipment, small robots, camera movement modules.
Product Model and Dimensions (Unit: mm)
HGH=HG Square slider; HGW=HG Flange slider; EGH=EG Square slider; EGW=EG Flange slider; W_R = Guide rail width; H = Total combined height; W = Slider width; L = Slider length
HG High-Assembled HGH (Four-Square Slider, HGH-CA Standard Model)
| Model | Guide Rail Width W_R | Combined Height H | Slider Width W | Slider Length L |
| HGH15CA | 15 | 28 | 34 | 61.4 |
| HGH20CA | 20 | 30 | 44 | 77.4 |
| HGH25CA | 25 | 36 | 48 | 84 |
| HGH30CA | 30 | 42 | 60 | 97.4 |
| HGH35CA | 35 | 48 | 70 | 111.4 |
| HGH45CA | 45 | 60 | 86 | 134 |
HG High-Assembled HGW (Flange Slider, HGW-CA Standard Model)
| Model | Guide Rail Width W_R | Combined Height H | Slider Width W | Slider Length L |
| HGW15CA | 15 | 28 | 47 | 61.4 |
| HGW20CA | 20 | 30 | 63 | 77.4 |
| HGW25CA | 25 | 36 | 70 | 84 |
| HGW30CA | 30 | 42 | 90 | 97.4 |
| HGW35CA | 35 | 48 | 100 | 111.4 |
| HGW45CA | 45 | 60 | 120 | 134 |
EG Low-Assembly EGH (Four-Square Slider, EGH-CA Standard Model)
| Model | Guide Rail Width W_R | Combined Height H | Slider Width W | Slider Length L |
| EGH15CA | 15 | twenty four | 34 | 56.8 |
| EGH20CA | 20 | 26 | 42 | 69 |
| EGH25CA | 25 | 30 | 48 | 79 |
| EGH30CA | 30 | 36 | 60 | 90 |
| EGH35CA | 35 | 40 | 70 | 101 |
EG low-assembly EGW (flange slider, EGW-CA standard model)
| Model | Guide Rail Width W_R | Combined Height H | Slider Width W | Slider Length L |
| EGW15CA | 15 | twenty four | 47 | 56.8 |
| EGW20CA | 20 | 26 | 63 | 69 |
| EGW25CA | 25 | 30 | 70 | 79 |
| EGW30CA | 30 | 36 | 90 | 90 |
| EGW35CA | 35 | 40 | 100 | 101 |
HA Extended Heavy-Duty Slider (HG Series HGH-HA Square/HGW-HA Flange)
| Model | Guide Rail Width W_R | Combined Height H | Slider Width W | Slider Length L |
| HGH20HA | 20 | 30 | 44 | 95.4 |
| HGH25HA | 25 | 36 | 48 | 104 |
| HGH30HA | 30 | 42 | 60 | 120.4 |
| HGH35HA | 35 | 48 | 70 | 138.2 |
| HGH45HA | 45 | 60 | 86 | 164 |
| HGW20HA | 20 | 30 | 63 | 95.4 |
| HGW25HA | 25 | 36 | 70 | 104 |
| HGW30HA | 30 | 42 | 90 | 120.4 |
| HGW35HA | 35 | 48 | 100 | 138.2 |
| HGW45HA | 45 | 60 | 120 | 164 |
SA short slider (EG low assembly EGH-SA square/EGW-SA flange)
| Model | Guide Rail Width W_R | Combined Height H | Slider Width W | Slider Length L |
| EGH15SA | 15 | twenty four | 34 | 46.8 |
| EGH20SA | 20 | 26 | 42 | 54 |
| EGH25SA | 25 | 30 | 48 | 64 |
| EGH30SA | 30 | 36 | 60 | 73 |
| EGW15SA | 15 | twenty four | 47 | 46.8 |
| EGW20SA | 20 | 26 | 63 | 54 |
| EGW25SA | 25 | 30 | 70 | 64 |
| EGW30SA | 30 | 36 | 90 | 73 |
MG Miniature Rails: MGN (narrow type), MGW (wide type)
C = Standard short slider; H = Miniature extended heavy-duty slider
| Model | Guide Rail Width W_R | Combined Height H | Slider Width W | Slider Length L |
| MGN7C | 7 | 9 | 17 | 19.4 |
| MGN7H | 7 | 9 | 17 | 24.8 |
| MGN9C | 9 | 10 | 20 | 24 |
| MGN9H | 9 | 10 | 20 | 31 |
| MGN12C | 12 | 13 | 24 | 27.5 |
| MGN12H | 12 | 13 | 24 | 35.5 |
| MGN15C | 15 | 16 | 28 | 34 |
| MGN15H | 15 | 16 | 28 | 44 |
| MGW7C | 7 | 9 | 25 | 19.4 |
| MGW7H | 7 | 9 | 25 | 24.8 |
| MGW9C | 9 | 10 | 30 | 24 |
| MGW9H | 9 | 10 | 30 | 31 |
| MGW12C | 12 | 13 | 34 | 27.5 |
| MGW12H | 12 | 13 | 34 | 35.5 |
| MGW15C | 15 | 16 | 40 | 34 |
| MGW15H | 15 | 16 | 40 | 44 |
Note: HA extended heavy-duty slider and SA short slider have the same guide rail width, only the slider length changes; the guide rail length can be customized as needed.