Product
Thrust ball bearing with flat seat
Thrust ball bearings are separable-type rolling bearings, composed of shaft washer, housing washer and ball-cage assembly. They are designed to carry pure axial thrust load only, NOT radial load.Single-direction series(511,512,513,514) supports one-way axial load. Double-direction series(522,523,524) supports bi-directional axial thrust.Made of high-carbon chromium bearing steel GCr15 for high hardness and wear-resistance. Available with stamped steel cage or machined brass cage. Ideal for medium-low speed operation with heavy axial force. Not recommended for high-speed rotation.
Product Description
Thrust ball bearings are separable-type rolling bearings, composed of shaft washer, housing washer and ball-cage assembly. They are designed to carry pure axial thrust load only, NOT radial load.Single-direction series(511,512,513,514) supports one-way axial load. Double-direction series(522,523,524) supports bi-directional axial thrust.Made of high-carbon chromium bearing steel GCr15 for high hardness and wear-resistance. Available with stamped steel cage or machined brass cage. Ideal for medium-low speed operation with heavy axial force. Not recommended for high-speed rotation.
Applications
1.Machine tools: spindle units, CNC rotary tables, ball-screw thrust support
2.Lifting equipment: crane hooks, hoists, vertical lifting mechanisms
3.Vertical pumps & deep-well pumps
4.Gearboxes, reducers, pressing machinery
5.Packaging, textile, hydraulic & pneumatic equipment, rotary fixtures
6.Engineering machinery, rotary jigs & fixtures
Installation Instructions
1.Clean shaft and housing thoroughly, remove chips, dirt and oil. Inspect bearing for scratches or rust. Use press sleeve; never hammer bearing directly.
2.Distinguish shaft washer (tight ring, smaller bore, rotates with shaft) and housing washer (loose ring, larger bore, fits housing). Reversed installation will burn out bearing quickly.
3.Apply mounting force only to washer face, never onto balls or cage. Large bearings can be thermally assembled at 80-100℃ oil bath.
4.Ensure good coaxiality between shaft and housing to avoid mis-alignment load.
5.Adjust axial clearance within 0.03-08mm. Apply spring pre-load for light-load condition to prevent ball sliding wear.
6.Fill 30-50% cavity with lithium-based grease. Rotate shaft manually several times to check free rotation.
7.Run-in test under 50% rated load for 1 hour, monitor temperature and noise.
Maintenance & Precautions
1.For axial thrust load Radial load will cause premature failure.
2.Not suitable for high-speed applications. Ensure sufficient minimum axial pre-load for horizontal-shaft installation to avoid ball slipping.
3.Re-grease every 3-6 months for normal working conditions; shorten intervals for dusty or high-temperature environment. Over-greasing leads to overheating.
4.Store in original package in dry, clean place. Do not drop or strike bearings.
5.Use professional puller tools for disassembly; no brute hammering.
6.Keep assembly environment clean. Contamination causes noise, pitting and short service life.
7.Stop operation immediately if abnormal noise, heat or jamming occurs.
Product Dimension Reference Table (Mainstream 51 Series One-Way Thrust Ball Bearings)
- d:inner diameter(mm); D:outer diameter(mm); T:total bearing height(mm); r:minimum chamfer(mm)
- Ca:dynamic load(kN); C0a:static load(kN); Grease:rotation speed (r/min); Oil:rotation speed (r/min); Weight:reference weight(kg)
Foreign trade independent website notice: Large sizes 511-84 / 512-92 / 513-68 / 514-30 are large non-standard heavy-duty thrust balls with brass machined cages. They are mostly used in heavy engineering machinery and presses . Regular stock is scarce. Parameters are based on samples from leading manufacturers; actual measurements by the manufacturer shall prevail.
511 Series (Slim and Lightweight)
| Model | d(mm) | D(mm) | T(mm) | r(mm) | Ca(kN) | C0a(kN) | Grease | Oil | Weight(kg) |
| 51100 | 10 | 24 | 9 | 0.3 | 10.0 | 14.0 | 6300 | 9000 | 0.019 |
| 51101 | 12 | 26 | 9 | 0.3 | 10.2 | 15.2 | 6000 | 8500 | 0.021 |
| 51102 | 15 | 28 | 9 | 0.3 | 10.5 | 16.8 | 5600 | 8000 | 0.024 |
| 51103 | 17 | 30 | 9 | 0.3 | 10.8 | 18.2 | 5300 | 7500 | 0.026 |
| 51104 | 20 | 35 | 10 | 0.3 | 14.2 | 24.5 | 4800 | 6700 | 0.040 |
| 51105 | 25 | 42 | 11 | 0.6 | 17.9 | 35.0 | 4300 | 6000 | 0.060 |
| 51106 | 30 | 47 | 11 | 0.6 | 20.4 | 42.2 | 4000 | 5600 | 0.068 |
| 51107 | 35 | 52 | 12 | 0.6 | 24.4 | 51.0 | 3800 | 5300 | 0.078 |
| 51108 | 40 | 60 | 13 | 0.6 | 28.2 | 63.2 | 3400 | 4800 | 0.110 |
| 51109 | 45 | 65 | 14 | 0.6 | 29.4 | 69.2 | 3200 | 4500 | 0.140 |
| 51110 | 50 | 70 | 14 | 0.6 | 30.2 | 73.5 | 3000 | 4300 | 0.150 |
| 51112 | 60 | 85 | 17 | 1.0 | 40.8 | 108 | 2600 | 3600 | 0.260 |
| 51115 | 75 | 100 | 19 | 1.0 | 48.0 | 147 | 2200 | 3200 | 0.380 |
| 51120 | 100 | 135 | 25 | 1.1 | 73.5 | 272 | 1600 | 2200 | 0.890 |
| 51124 | 120 | 155 | 27 | 1.1 | 82.2 | 328 | 1400 | 1900 | 1.18 |
| 51128 | 140 | 180 | 31 | 1.5 | 110 | 402 | 1200 | 1800 | 1.85 |
| 51132 | 160 | 200 | 34 | 1.5 | 125 | 480 | 1100 | 1600 | 2.30 |
| 51140 | 200 | 250 | 42 | 2.0 | 180 | 735 | 850 | 1200 | 4.30 |
| 51148 | 240 | 300 | 45 | 2.0 | 208 | 940 | 700 | 950 | 6.50 |
| 51160 | 300 | 380 | 62 | 3.0 | 305 | 1600 | 530 | 750 | 13.2 |
| 51184 | 420 | 500 | 65 | 4.0 | 410 | 2400 | 700 | 1000 | 25.3 |
512 Series (Medium-sized, Medium-load)
| Model | d(mm) | D(mm) | T(mm) | r(mm) | Ca(kN) | C0a(kN) | Grease | Oil | Weight (kg) |
| 51200 | 10 | 26 | 11 | 0.6 | 12.5 | 17.0 | 6000 | 8000 | 0.028 |
| 51201 | 12 | 28 | 11 | 0.6 | 13.2 | 19.0 | 5300 | 7500 | 0.031 |
| 51202 | 15 | 32 | 12 | 0.6 | 16.5 | 24.8 | 4800 | 6700 | 0.044 |
| 51203 | 17 | 35 | 12 | 0.6 | 17.0 | 27.2 | 4500 | 6300 | 0.050 |
| 51204 | 20 | 40 | 14 | 0.6 | 22.2 | 37.5 | 4000 | 5600 | 0.075 |
| 51205 | 25 | 47 | 15 | 0.6 | 26.5 | 50.0 | 3400 | 4800 | 0.110 |
| 51206 | 30 | 52 | 16 | 0.6 | 29.3 | 58.2 | 3200 | 4500 | 0.140 |
| 51207 | 35 | 62 | 18 | 1.0 | 39.2 | 78.5 | 2800 | 4000 | 0.210 |
| 51208 | 40 | 68 | 19 | 1.0 | 47.0 | 98.0 | 2600 | 3600 | 0.260 |
| 51209 | 45 | 73 | 20 | 1.0 | 48.5 | 105 | 2400 | 3400 | 0.310 |
| 51210 | 50 | 78 | 22 | 1.0 | 54.2 | 125 | 2200 | 3200 | 0.370 |
| 51212 | 60 | 95 | 26 | 1.0 | 72.8 | 188 | 1900 | 2600 | 0.620 |
| 51215 | 75 | 115 | 32 | 1.1 | 102 | 280 | 1500 | 2100 | 1.10 |
| 51220 | 100 | 150 | 38 | 1.5 | 138 | 448 | 1200 | 1700 | 2.20 |
| 51224 | 120 | 170 | 42 | 1.5 | 162 | 570 | 1000 | 1500 | 3.10 |
| 51228 | 140 | 200 | 46 | 2.0 | 190 | 598 | 850 | 1300 | 4.27 |
| 51232 | 160 | 225 | 51 | 2.1 | 245 | 830 | 750 | 1100 | 6.20 |
| 51240 | 200 | 270 | 58 | 2.1 | 310 | 1160 | 630 | 900 | 9.40 |
| 51248 | 240 | 310 | 63 | 2.1 | 340 | 1420 | 530 | 750 | 13.0 |
| 51260 | 300 | 380 | 80 | 3.0 | 470 | 2240 | 420 | 600 | 23.0 |
| 51292 | 460 | 620 | 130 | 5.0 | 923 | 5850 | 430 | 600 | 116 |
513 Series (Heavy Duty Thick Type)
| Model | d(mm) | D(mm) | T(mm) | r(mm) | Ca(kN) | C0a(kN) | Grease | Oil | Weight (kg) |
| 51305 | 25 | 52 | 18 | 1.0 | 35.7 | 61.4 | 3100 | 4400 | 0.180 |
| 51306 | 30 | 60 | twenty one | 1.0 | 42.8 | 78.7 | 2700 | 3800 | 0.270 |
| 51307 | 35 | 68 | 24 | 1.0 | 54.2 | 105 | 2400 | 3400 | 0.390 |
| 51308 | 40 | 78 | 26 | 1.0 | 63.2 | 128 | 2200 | 3000 | 0.520 |
| 51309 | 45 | 85 | 28 | 1.0 | 67.8 | 140 | 2000 | 2800 | 0.650 |
| 51310 | 50 | 95 | 31 | 1.1 | 82.8 | 178 | 1800 | 2600 | 0.880 |
| 51312 | 60 | 110 | 35 | 1.1 | 105 | 248 | 1600 | 2200 | 1.35 |
| 51315 | 75 | 135 | 44 | 1.5 | 142 | 368 | 1300 | 1800 | 2.35 |
| 51320 | 100 | 170 | 55 | 2.0 | 208 | 610 | 1000 | 1400 | 4.60 |
| 51324 | 120 | 210 | 70 | 2.1 | 290 | 880 | 800 | 1200 | 8.60 |
| 51328 | 140 | 240 | 80 | 2.1 | 395 | 1230 | 560 | 800 | 14.1 |
| 51332 | 160 | 270 | 87 | 3.0 | 450 | 1480 | 500 | 700 | 18.5 |
| 51340 | 200 | 310 | 95 | 3.0 | 530 | 1900 | 430 | 600 | 25.0 |
| 51348 | 240 | 380 | 112 | 4.0 | 710 | 2800 | 360 | 500 | 42.0 |
| 51368 | 340 | 540 | 160 | 5.0 | 1040 | 5850 | 400 | 560 | 141 |
514 Series (Extra Heavy Duty, High Pressure)
| Model | d(mm) | D(mm) | T(mm) | r(mm) | Ca(kN) | C0a(kN) | Grease | Oil | Weight (kg) |
| 51405 | 25 | 60 | twenty four | 1.1 | 55.6 | 89.4 | 2600 | 3600 | 0.340 |
| 51406 | 30 | 70 | 28 | 1.1 | 72.8 | 126 | 2200 | 3200 | 0.530 |
| 51407 | 35 | 80 | 32 | 1.1 | 86.4 | 158 | 2000 | 2800 | 0.820 |
| 51408 | 40 | 90 | 36 | 1.1 | 112 | 220 | 1800 | 2400 | 1.180 |
| 51409 | 45 | 100 | 39 | 1.5 | 140 | 280 | 1600 | 2200 | 1.620 |
| 51410 | 50 | 110 | 43 | 1.5 | 160 | 325 | 1500 | 2000 | 2.120 |
| 51412 | 60 | 130 | 51 | 2.0 | 199 | 400 | 1100 | 1600 | 3.10 |
| 51415 | 75 | 160 | 65 | 2.1 | 251 | 560 | 900 | 1400 | 6.75 |
| 51420 | 100 | 210 | 85 | 3.0 | 400 | 1120 | 700 | 950 | 14.5 |
| 51424 | 120 | 250 | 98 | 4.0 | 490 | 1530 | 600 | 800 | 22.0 |
| 51430 | 150 | 300 | 120 | 4.0 | 620 | 2010 | 480 | 710 | 39.5 |