German JVAV Bearing

Send a message

Contact Us Inquiry

Product

Thrust roller bearing

293 / 294 series spherical roller thrust bearings are separable type-9 thrust roller bearings. Consist of shaft washer, spherical housing washer, asymmetrical spherical rollers and machined brass cage. Spherical raceway on housing washer provides self-aligning capability, compensates shaft deflection and housing misalignment.

Request a Quote
Product Details

Product Description

293 / 294 series spherical roller thrust bearings are separable type-9 thrust roller bearings. Consist of shaft washer, spherical housing washer, asymmetrical spherical rollers and machined brass cage. Spherical raceway on housing washer provides self-aligning capability, compensates shaft deflection and housing misalignment.

Primarily for heavy single-direction axial load, permissible radial load shall not exceed 55% of axial load.- 293 series: medium cross-section, heavy-duty, balanced load & dimension, general heavy-industry selection.- 294 series: extra-thick cross-section, maximum load capacity within 29000 family, for presses and heavy shock-load equipment.

Made of hardened GCr15 bearing steel. Large-size models fitted with machined brass cage (suffix-EM / EJ). E-type optimized internal geometry for higher load rating. Fully separable construction for easy mounting & replacement. Compared with thrust cylindrical roller bearings, it tolerates installation misalignment and allows higher limiting speed.

Note: Only for single-direction thrust load. Minimum axial preload is required to avoid roller sliding damage.

Applications

1.Hydro-power equipment: hydro-turbine main-shaft thrust, vertical generators

2.Heavy-duty presses: hydraulic presses, extruders, forging machinery

3.Mining & metallurgy: vertical mills, crushers, rolling mills, continuous-casting machines

4.Construction machinery: tower crane slewing units, shield machines, heavy jacks

5.Marine equipment: propeller shaft thrust blocks

6.Heavy-duty machine tools: vertical lathe rotary tables, large vertical gearboxes

7.Vertical cement mills, oil drilling rigs, large injection-molding machines

Installation Instructions

1.Clean shaft and housing thoroughly, remove burrs and metal chips. Inspect bearing components for cracks or impact damage. Use press sleeve, never strike rollers or cage with hammer.

2.Distinguish shaft-washer(tight fit, rotates with shaft) and spherical housing-washer(loose fit in housing, spherical surface face towards rollers). Reversed assembly causes premature failure.

3.Apply mounting pressure only on washer face, never onto rolling elements. Heat large-size bearings in 80-100 ℃ oil bath for thermal mounting.

4.Though self-aligning, keep good coaxiality; excessive misalignment shortens service life.

5.Apply minimum axial pre-load, zero-load operation is forbidden to prevent roller sliding.

6.Circulating-oil lubrication preferred for heavy load. For low-speed grease-lubricated condition, fill housing cavity 30-40% with EP lithium grease. Rotate shaft manually for smooth movement check.

7.Partial-load run-in test for 1-2 hours, monitor temperature and noise before full-load operation.

Maintenance & Precautions

1.Only for single-direction axial thrust. Permissible radial load ≤55% of axial load, overload will lead to early bearing failure.

2.Minimum axial pre-load must be maintained. Higher rotating speed requires higher minimum pre-load to avoid roller sliding scoring.

3.Circulating oil lubrication recommended for heavy-high-speed working condition. Re-lubricate with EP lithium-base grease every 3-6 months for grease-lubricated applications. Shorten maintenance interval for dusty / high-temperature / shock-load environment. Over-greasing causes overheating.

4.Store in original sealed package, dry and dust-free warehouse. Avoid dropping and impact.

5.Use professional puller for disassembly; brute hammering is strictly forbidden.

6.Keep assembly environment clean. Contamination results in pitting, abnormal noise and reduced service life.

7.Stop equipment immediately if over-heating, harsh noise or jamming occurs.

8.Self-aligning function only compensates limited angular offset. Do not use bearing to compensate severe shaft bending or housing distortion.

Product Dimension Parameter Table (293/294 Thrust Self-Aligning Roller Bearing GB/T5859-2023)

Symbol Explanation: d:inner diameter (mm); D:outer diameter (mm); T:total bearing height (mm); r:minimum chamfer (mm) ; Ca:dynamic load (kN) ; C0a:static load (kN); Grease limiting speed (r/min); Oil limiting speed (r/min); Weight:reference weight (kg).

Note: 293/294 spherical roller thrust bearings can bear combined axial and radial loads, with the radial load ≤ 55% of the axial load. Larger-sizes-feature machined brass cages; these are custom-made and have limited stock. Parameters refer to GB/T5859-2023 and samples from major bearing manufacturers; actual values depend on the production batch.

Ask About This Bearing.

Send us your specifications and operating conditions to discuss whether this bearing suits your application.

Send inquiry